Skip to the text
Drain Cleaning Los Angeles (747) 339-3546

Backwater valves: when the city sewer pushes back

A backwater valve is a one-way flap in the house drain. Waste flows out; if the sewer in the street backs up, the flap closes so the backup stays out of your house.

When LA requires one

LA Sanitation explains it this way: if a plumbing fixture in the house sits lower than the next manhole cover upstream on the street sewer, the property needs a backwater valve. A sewer that fills to street level would otherwise empty into that fixture first. The valve needs a permit from the Los Angeles Department of Building and Safety, LADBS.

Homes on lots that drop away from the street are the usual case: a lower-level bathroom on a hillside, or a house set below the road. The hillside homes page covers those neighborhoods.

Fixture lowerthan the manhole coverFlap swings shut when thesewer pushes backAccess box for checksManhole coverupstream
A backwater valve closes when sewage pushes back toward the house.

How you'd know the valve matters

  • A bottom-floor bathroom or laundry drain sits below the street.
  • Sewage has come up in that fixture during a city main backup before.
  • A home inspection or the drain company's camera found the valve missing, or stuck open.

Keeping it working

A valve only helps if the flap can close. Paper, grease and roots can hold it open, and an old flap can stick.

  • Find the access box. It is usually in the yard or a lower floor, with a lid over the valve.
  • Have it opened and checked when the main drain is cleaned, or at least every year or two.
  • Never jam it open to stop a slow drain; fix the slow drain instead.

What installing one involves

The valve goes into the building drain, at a point where only the low fixtures drain through it. Fixtures above the manhole level shouldn't drain through the valve, so the plumber has to work out which branches join where. That's why a camera and a look at the house layout usually come first. It involves digging to the pipe, cutting it and setting the valve in an access box, plus a permit and an inspection.

Questions for the company

Which fixtures will drain through the valve?

The answer should be only the ones below the manhole level, with the reason.

Will you pull the LADBS permit?

Ask before work starts and keep the permit and inspection sign-off with your house papers.