Skip to the text
Drain Cleaning Los Angeles (747) 339-3546

Hydro jetting: scouring the pipe instead of punching a hole

Jetting runs a hose with a special nozzle up the pipe and scrubs the walls with water at high pressure. It is a cleaning method, not a repair, and it suits some pipes much better than others.

How the nozzle works

The nozzle has small openings that point backwards. Water leaving them pulls the hose forward into the pipe and blasts the walls behind it. A forward jet breaks up soft blockages ahead. As the operator pulls the hose back, the loosened grease, sludge and root hair wash down toward the city main.

High-pressure hoseNozzleRear jets push it forwardand scour the pipe wallFront jetGrease coating
A jetting nozzle pulls itself along with rear jets that scrub the pipe walls.

When jetting makes sense

  • A kitchen line that a cable has opened more than once, only to slow again within weeks.
  • Fine roots that a cutter trims but can't scrub away.
  • Sludge and scale lying along the bottom of a long lateral.
  • Before a camera inspection, so the walls are visible.
  • Before a pipe is lined, since a liner needs a clean surface to bond to.

When it should wait

Jetting is the wrong tool for a pipe that is cracked open, badly offset or partly collapsed. High-pressure water can wash soil into the pipe or push a broken piece further out of line. A good operator runs a camera first on an old or troubled lateral, or at least asks you about its history.

It also isn't needed for every clog. A hair clog in a tub or a toilet with a toy in it gets nothing from a jetter.

What a jetting visit involves

The equipment is larger than a cable machine. Some units sit on a trailer; smaller ones carry in. The operator needs a cleanout or another opening big enough for the hose, water from an outdoor hose bib in some cases, and room to lay out the hose. Expect some spray around the opening, which is why they cover the area.

Things to ask

Did you look at the pipe before jetting it?

On an older lateral, ask to see camera footage first, or ask what made them confident it is sound.

What nozzle are you using, and why?

Root-cutting and grease nozzles differ. The answer shows they matched the tool to your pipe.

Will you run the camera afterwards?

Footage after jetting shows whether the walls are clean and whether any damage was hiding under the buildup.